How does the Mr. E-ZY work?

Unpacking and charging
Take the Mr. E-ZY out of the box and remove the white protection ring around the powerbank. You will now see an orange on/off button. Remove the included USB-C cable from the pouch and connect it to a suitable USB adapter. Carefully slide aside the small round protection cap of the USB-C port and connect the cable to the powerbank.
While charging, the indicator light will be red: the powerbank is charging. Once it is fully charged, the light turns green. The first charge takes about 2 to 3 hours; fully charge the powerbank before first use.

Important for a new Mr. E-ZY
We always recommend fully charging the powerbank before first use, even if it seems to have enough charge upon receipt. A powerbank achieves its best performance when properly charged. Therefore, it is wise to start with a fully charged powerbank.

You do not need to use the powerbank until it is completely empty before recharging it. You can simply recharge it after use. Our advice is therefore very simple:
Used it? Feel free to fully recharge it afterwards.
This way, you know your power bank will be properly charged and ready the next time you want to use your Mr. E-ZY.

Getting ready to use
Unroll the Mr. E-ZY completely and completely unscrew the large rotary knob on the powerbank. Note: the opening must remain free so that air can flow in.

Automatic filling
Press the orange button on the built-in powerbank once — the Mr. E-ZY now fills up fully automatically in about 70 seconds. When the Mr. E-ZY is full and reaches the correct pressure, you will hear the powerbank make a little more noise (this is normal) and see that it is properly inflated.

Seal first, then turn off the powerbank
First turn the large rotary knob completely tight and only then press the orange button to turn off the powerbank. (Not the other way around!) This prevents unnecessary air from escaping your Mr. E-ZY while turning it off.

Now your Mr. E-ZY is ready for use. Enjoy the convenience and comfort!

Use the attachment loop only when you are not sitting or lying on the Mr. E-ZY .
Never place a peg directly into the small hole of the loop. Always use a string in between to prevent damage.

Tip for the beach:
Fill the included carrying bag with sand and attach the cord of the carrying bag to the attachment loop. This creates a convenient and sturdy anchor for your Mr.E-ZY, keeping it securely in place.

Your Mr. E-ZY was developed not only to fill itself automatically in about 70 seconds, but also to be easily and compactly taken with you again after use.

1. Deflate and roll up
Open the large rotary knob on the powerbank so that the air can escape from the Mr. E-ZY.

Then start at the other side of the Mr. E-ZY and roll the product up slowly and evenly towards the powerbank. This way, you automatically push the air towards the large opening while rolling.

Within approximately 90 seconds, you will have your Mr. E-ZY compactly rolled up again.

Is your Mr. E-ZY completely rolled up? Then fold the rolled-up Mr. E-ZY into three parts. This creates a compact package that easily fits into the included carrying bag.

So, it’s very simple:
1. Open the large dial
2. Roll up from the other end towards the power bank
3. Fold the entire roll into thirds
4. Place in the carrying bag

You don’t need to use any force for this. Rolling it up slowly and evenly works best.

Ensure your Mr. E-ZY is dry
Has your Mr. E-ZY become damp or wet? Then preferably let it dry thoroughly before storing it rolled up in the carrying bag for a longer period.

It is also best to remove sand and other dirt first. This keeps the material and the carrying bag neat for as long as possible.

Not using it for a long time?
If you are not using your Mr. E-ZY for a longer period, for example during the winter, store it clean and dry in a dry place.

Don’t forget the built-in powerbank. During a longer storage period, fully charge it occasionally to keep the powerbank in good condition.